


| Параметр | Құны |
|---|---|
| Тауар | Specifications |
| PFHD | Refer to the following table(Note: (Probability of dangerous failure per hour) depends on number of single beam sensorST4-A□connected to controller.) |
| MTTFD | More than 100 years (Note:Mean time to dangerous failure (in years)) |
| Салмақ | Net weight: 240 g approxGross weight: 450 g approx |
| Мәліметтер | Controller [High-functional] |
| Өнім | Compact Type 4 Safety Beam Sensor |
| Материал | Enclosure: ABS |
| Бөлшек нөмірі | ST4-C12EX |
| Өнім атауы | Compact Type 4 Safety Beam Sensor ST4 |
| Сымдарды жалғау кабелі | Terminal block connector: 0.2 to 1.5 mm2Power supply connector (A1, A2): 0.2 to 2.5 mm2 |
| Қуат кернеуі | 24 V DC +10-15 % Ripple P-P 10 % or less |
| Жауап беру уақыты | OFF response: 25 ms or lessON response: 90 ms or less (auto reset) / 140 ms or less (manual reset) |
| Өнім нөмірі | ST4-C12EX |
| Көмекші шығыстар | PNP open-collector transistor / NPN open-collector transistor (Set using output polarity selection switch)ST4-C11: one outputST4-C12EX: four outputs[PNP output]Maximum source current: 100 mAApplied voltage: same as the supply voltage (between auxiliary output and +V)Residual voltage: 2.5 V or less (at 100 mA source current)[NPN output]Maximum sink current: 100 mAApplied voltage: same as the supply voltage (between auxiliary output and 0 V)Residual voltage: 2.0 V or less (at 100 mA sink current)(Note) If the total current of the control outputs (OSSD1, OSSD2), auxiliary outputs, and muting lamp output exceeds 400 mA, the wiring resistance between the controller and the power supply should be 1 Ohm or less. In addition, if the total current is 400 mA or less, the wiring resistance between the controller and the power supply should be 2 Ohm or less. |
| Шам шығысын өшіру | Available muting lamp: 24 V DC, 1 to 10 W(Note) If the total current of the control outputs (OSSD1, OSSD2), auxiliary outputs, and muting lamp output exceeds 400 mA, the wiring resistance between the controller and the power supply should be 1 Ohm or less. In addition, if the total current is 400 mA or less, the wiring resistance between the controller and the power supply should be 2 Ohm or less. |
| Қосылу терминалы | Detachable spring-cage terminal |
| Ағымдағы тұтыну | 120 mA or less (excluding sensor head ST4-Ax) |
| Қолданылатын стандарттар | IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1:2015 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 3 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 3 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)(Note) Complies with those standards only when the controller is used in combination with the sensor head ST4-x. |
| Қолданылатын сенсорлық бас | ST4-Ax |
| CE белгісі директивасына сәйкестік | Machinery Directive, EMC Directive, RoHS Directive |
| Көмекші шығыстар: Жұмыс режимі | ON when muting function is invalidOFF when muting function is validON when override function is invalidOFF when override function is validON when muting lamp is in normal conditionOFF when muting lamp is in abnormal conditionNegative logic of the control outputs (OSSD1, OSSD2) |
| Басқару шығыстары (OSSD 1, OSSD 2) | PNP open-collector transistor / NPN open-collector transistor Dual output x 1 system (Set using output polarity selection switch)[PNP output]Maximum source current: 200 mAApplied voltage: same as the supply voltage (between control output and +V)Residual voltage: 2.5 V or less (at 200 mA source current)Leakage current: 200 micro A or less (including power OFF condition)Maximum load capacity: 1 micro F (from no-load to max. source current)Load wiring resistance: 3 Ohm or less (between control output and load)[NPN output]Maximum sink current: 200 mAApplied voltage: same as the supply voltage (between control output and 0 V)Residual voltage: 2.0 V or less (at 200 mA sink current)Leakage current: 200 micro A or less (including power OFF condition)Maximum load capacity: 1 micro F (from no-load to max. sink current)Load wiring resistance: 3 Ohm or less (between control output and load)(Note) If the total current of the control outputs (OSSD1, OSSD2), auxiliary outputs, and muting lamp output exceeds 400 mA, the wiring resistance between the controller and the power supply should be 1 Ohm or less. In addition, if the total current is 400 mA or less, the wiring resistance between the controller and the power supply should be 2 Ohm or less. |
| Көмекші шығыстар: Қорғаныс тізбегі | Incorporated |
| Шамның дыбысын өшіру: Қорғаныс тізбегі | Incorporated |
| Қоршаған ортаға төзімділік: Қоршаған орта ылғалдылығы | 30 to 85 % RH, Storage: 30 to 95 % RH |
| Қоршаған ортаға төзімділік: Соққыға төзімділік | 300 m/s2acceleration in X, Y and Z directions three times each |
| Қоршаған ортаға төзімділік: Қоршаған орта температурасы | -10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: -25 to +70 ℃-13 to +158℉ |
| Қоршаған ортаға төзімділік: Қорғаныс дәрежесі | Enclosure: IP40 (IEC)Terminal: IP20 (IEC) |
| Қоршаған ортаға төзімділік: Дірілге төзімділік | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 90 m/s2 in X, Y and Z directions for two hours each< |
| Қоршаған ортаға төзімділік: Оқшаулауға төзімділік | 20 MOhm or more with 500 V DC mega between all supply terminals connected together and enclosure |
| Басқару шығыстары (OSSD 1, OSSD 2): Жұмыс режимі | ON when all beams of the connected ST4-Axs are receivedOFF when one or more beams of the connected ST4-Axs are interrupted(except during muting / override)OFF during lockout |
| Қолданылатын сенсор басы: тізбекті қосылымдар саны | Interference prevention possible when up to a maximum of 6 sets are connected(When the maximum of 3 controllers are connected together, interference prevention is possible for up to 18 sets) |
| Басқару шығыстары (OSSD1, OSSD2): Қорғаныс тізбегі | Incorporated |
| Қоршаған ортаға төзімділік: Кернеуге төзімділік | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Техникалық сипаттамалар және өнімділік деректері
Орнату және пайдалану нұсқаулығы