


| Параметр | Құны |
|---|---|
| When communication unitis connected | |
| Тауар | Specifications |
| Кабель | 0.2 mm22-core (brown and blue lead wires) / 0.15 mm27-core composite cable, 2 m6.562 ftlong |
| Мәліметтер | Master unit / High performance type |
| Өнім | Controller |
| Материал | Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal |
| Таза салмақ | 140 g approx. |
| Бөлшек нөмірі | HG-TC101 |
| 1-ден 7 бірлікке дейін | 1 to 6 units |
| Өнім атауы | Thru-beam Type Digital Displacement Sensor HG-T |
| 8-ден 15 бірлікке дейін | 7 to 14 units |
| Дисплей диапазоны | -199.999 to 199.999 mm-7.874 to 7.874 in |
| Іріктеу жиілігі | 1 ms (standard sampling) / 0.5 ms (high-speed sampling) |
| Өнім нөмірі | HG-TC101 |
| Қоректендіру кернеуі | 24 V DC ±10 %, including ripple 0.5 V (P-P) |
| Ластану дәрежесі | 2 |
| Дисплей ажыратымдылығы | 1 μm0.039 mil |
| Жұмыс биіктігі | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Ағымдағы тұтыну | 100 mA or less (when sensor head is connected)(Note) : Current consumption does not include analog current output. |
| Нормативтік талаптарға сәйкестік | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Қолданылатын сенсорлық бас | HG-T1010、HG-T1110 |
| Сыртқы кіріс коммутациясы | Input 1, Input 2, and Input 3 can be switched to "Preset / Reset / Trigger", "Bank Input A / Bank Input B / Select (Preset, Reset, Trigger)", or "Laser emission stop". |
| Сыртқы шығыс коммутациясы | Output 1, Output 2, and Output 3 can be switched to 3-value, 2-value, Logic, and Logic 2. |
| Орташа саны (жауап беру уақыты) | 1 time (2 ms), 2 times (3 ms), 4 times (5 ms), 8 times (9 ms), 16 times (17 ms), 32 times (33 ms), 64 times (65 ms), 128 times (129 ms), 256 times (257 ms), 512 times (513 ms), and 1,024 times (1,025 ms) switching type(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| Қосылған бағынышты бірліктер саны | Maximum sink current and sourcecurrent of control output |
| Кедергілердің алдын алу функциясы | Incorporated(Note) : This function operates for each set of 4 connected controllers. |
| Қоршаған ортаға төзімділік: Қорғаныс | IP40(IEC) |
| Аналогтық шығыс: Аналогтық ток шығысы | •Current output range: 4 to 20 mA/F.S. (default value)•Linearity: ±0.25 % F.S.•Output when alarm occurs: 0 mA•Load impedance: 250 Ω max.(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output. |
| Аналогтық шығыс: Аналогтық кернеу шығысы | •Voltage output range: 1 to 5 V/F.S. (default value)•Linearity: ±0.05 % F.S.•Output when alarm occurs: 5.2 V•Output impedance: 100 Ω max.(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output. |
| Сыртқы кіріс (1-кіріс, 2-кіріс, 3-кіріс) | Non-contact input or NPN open-collector transistor•Input conditionsInvalid: +8 V to +V DC or open, Valid: 0 to +1.2 V DC•Input impedance: 10 kΩ approx.Non-contact input or PNP open-collector transistor•Input conditionsInvalid: 0 to +0.6 V DC or open, Valid: +4 V to +V DC•Input impedance: 10 kΩ approx. |
| Қосылатын контроллерлердің ең көп саны | Up to 15 slave units can be connected to a master unit.(Note) : When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit. |
| Қоршаған ортаға төзімділік: Қоршаған орта ылғалдылығы | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Қоршаған ортаға төзімділік: Соққыға төзімділік | 98m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| Басқару шығысы (1-шығыс, 2-шығыс, 3-шығыс) | NPN open-collector transistor•Maximum sink current: 50 mA (Note)•Applied voltage: 30 V DC or less (between output and 0 V)•Residual voltage: 1.5 V or less (at 50 mA sink current)•Leakage current: 0.1 mA or lessPNP open-collector transistor•Maximum source current: 50 mA (Note)•Applied voltage: 30 V DC or less (between output and +V)•Residual voltage: 1.5 V or less (at 50 mA source current)•Leakage current: 0.1 mA or less(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10~+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| Қоршаған ортаға төзімділік: Қоршаған орта температурасы | -10 to +50 ℃+14 to +122 ℉(No dew condensation or icing allowed) (Note), Storage: -20 to +60 ℃-4 to +140 ℉(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10~+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| Қоршаған ортаға төзімділік: Дірілге төзімділік | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude (10 to 58 Hz), Maximum acceleration 49 m/s2(58 to 150 Hz) in X, Y and Z directions for two hours each |
| Қоршаған ортаға төзімділік: Оқшаулауға төзімділік | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Қоршаған ортаға төзімділік: Кернеуге төзімділік | 1,000 V AC for one minute between all supply terminals connected together and enclosure |
| Сыртқы кіріс (1-кіріс, 2-кіріс, 3-кіріс): Кіріс уақыты | • Trigger input: 2 ms or more (ON)• Laser emission stop input, preset input, reset input, bank input A/B(Note): 20 ms or more (ON)(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| Басқару шығысы (1-шығыс, 2-шығыс, 3-шығыс): Дабыл шығысы | Open when alarm occurs |
| Басқару шығысы (1-шығыс, 2-шығыс, 3-шығыс): Бағалау шығысы | N.O. / N.C. switching type |
| Басқару шығысы (1-шығыс, 2-шығыс, 3-шығыс): Қысқа тұйықталудан қорғау | Incorporated (automatic reset type) |
Техникалық сипаттамалар және өнімділік деректері
Орнату және пайдалану нұсқаулығы