

| Параметр | Құны |
|---|---|
| IP67, when in locked state | |
| Ескерту | In line with |
| Материал | Zinc die-cast (nickel-plated) |
| Бас дизайны | Pin |
| Тақырып түрі | M12 |
| Өнім түрі | Panel mounting base |
| Құрастыру нотасы | Spacing between the top edge of the PCB and the back of the front plate: 7 mm |
| Орнату түрі | Rear mounting M15 x 1 Spacing between the top edge of the PCB and the back of the front plate: 7 mm |
| Тығыздағыш материалы | FKM |
| Мақаланы қайта қарау | 04 |
| Бас жіп түрі | M12 |
| Қосылу әдісі | THR solder connection |
| Бас бекіту түрі | SPEEDCON |
| Қатайту моменті | 1.5 ... 2 Nm |
| Жұмыс туралы ескертпелер | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Тапсырыс туралы ақпарат: | Lock nut is included in the scope of delivery |
| Қорғау дәрежесі | IP67 (correctly plugged in and locked) |
| Стандартты белгілеу | M12 connector |
| Стандарттар/техникалық сипаттамалар | IEC 61076-2-101 |
| Енгізу/шығару циклдары | > 100 |
| Қоршаған орта температурасы (жұмыс) | -25 °C ... 85 °C (Plug / socket) |
| Қорғаныс дәрежесі (қосылған кезде) | IP67 (correctly plugged in and locked) |
Техникалық сипаттамалар және өнімділік деректері
Орнату және пайдалану нұсқаулығы