RPS-60-3.3

60W Single Output Medical TypeRPS-60series 60W Single Output Medical TypeRPS-60series60W Single Output Medical TypeRPS-60series Features : Features :Features : 4"x2"miniature size 4"x2"miniature size4"x2"miniature size Universal AC input / Full range Universal AC input / Full rangeUniversal AC input / Full range Low leakagecurrent<100 Low leakagecurrent<100Low leakagecurrent<100 Protections: short circuit / Overload/ Over voltage Protections: short circuit / Overload/ Over voltageProtections: short circuit / Overload/ Over voltage Cooling by free air convection Cooling by free air convectionCooling by free air convection Medical safety approved (2 x MOPPbetweenprimaryto secondary) Medical safety approved (2 x MOPPbetweenprimaryto secondary)Medical safety approved (2 x MOPPbetweenprimaryto secondary) UL60950-1/IEC60950-1/EN60950-1 ITE safety approved UL60950-1/IEC60950-1/EN60950-1 ITE safety approvedUL60950-1/IEC60950-1/EN60950-1 ITE safety approved No load power consumption<0.75 W No load power consumption<0.75 WNo load power consumption<0.75 W Fixed switch frequency 100KHz Fixed switch frequency 100KHzFixed switch frequency 100KHz Suitable for BF application with appropriate systemconsideration Suitable for BF application with appropriate systemconsiderationSuitable for BF application with appropriate systemconsideration 3 years warranty 3 years warranty3 years warranty SPECIFICATION SPECIFICATIONSPECIFICATION MODEL RPS-60-3.3 MODEL RPS-60-3.3MODEL RPS-60-3.3 RPS-60-5 RPS-60-5RPS-60-5 RPS-60-12 RPS-60-12RPS-60-12 .. .... RPS-60-15RPS-60-24RPS-60-48 RPS-60-15RPS-60-24RPS-60-48RPS-60-15RPS-60-24RPS-60-48 DC VOLTAGE RATED CURRENT CURRENT RANGE DC VOLTAGE RATED CURRENT CURRENT RANGEDC VOLTAGE RATED CURRENT CURRENT RANGE 3.3 V 3.3 V3.3 V 10A 10A10A 0 ~ 11A 0 ~ 11A0 ~ 11A 5V 5V5V 10A 10A10A 0 ~ 11A 0 ~ 11A0 ~ 11A 12V 12V12V 5A 5A5A 0 ~ 5.5 A 0 ~ 5.5 A0 ~ 5.5 A 15V24V48V 15V24V48V15V24V48V 4A2.5A 1.25 A 4A2.5A 1.25 A4A2.5A 1.25 A 0 ~ 4.4A0 ~ 2.75A0 ~ 1.375 A 0 ~ 4.4A0 ~ 2.75A0 ~ 1.375 A0 ~ 4.4A0 ~ 2.75A0 ~ 1.375 A RATED POWER RATED POWERRATED POWER 33W 33W33W 50W 50W50W 60W 60W60W 60W 60W60W 60W 60W60W 60W 60W60W Maximum LOAD(10 sec.) Note.436.3 W Maximum LOAD(10 sec.) Note.436.3 WMaximum LOAD(10 sec.) Note.436.3 W 55W 55W55W 66W 66W66W 66W 66W66W 66W 66W66W 66W 66W66WOUTPUT OUTPUTOUTPUT RIPPLE & NOISE (max.) Note.2 80mVp-p RIPPLE & NOISE (max.) Note.2 80mVp-pRIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 80mVp-p80mVp-p 120mVp-p 120mVp-p120mVp-p 150mVp-p 240mVp-p 300mVp-p 150mVp-p 240mVp-p 300mVp-p150mVp-p 240mVp-p 300mVp-p VOLTAGE ADJ. RANGE of VOLTAGE ADJ. RANGE ofVOLTAGE ADJ. RANGE of 3.1 ~ 3.6 V 3.1 ~ 3.6 V3.1 ~ 3.6 V 4.75 ~ 5.5 V 4.75 ~ 5.5 V4.75 ~ 5.5 V 11.4 ~ 13.2 V 11.4 ~ 13.2 V11.4 ~ 13.2 V 13.5 ~ 16.5 V 22.8 ~ 27.6 V 45.6 ~ 52.8 V 13.5 ~ 16.5 V 22.8 ~ 27.6 V 45.6 ~ 52.8 V13.5 ~ 16.5 V 22.8 ~ 27.6 V 45.6 ~ 52.8 V VOLTAGE TOLERANCE Note.32.0% VOLTAGE TOLERANCE Note.32.0%VOLTAGE TOLERANCE Note.32.0% 2.0% 2.0%2.0% 2.0% 2.0%2.0% 2.0% 2.0%2.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATIONLINE REGULATION LOAD REGULATION 0.5% 0.5%0.5% 1.0% 1.0%1.0% 0.5% 0.5%0.5% 1.0% 1.0%1.0% 0.5% 0.5%0.5% 1.0% 1.0%1.0% 0.5% 0.5%0.5% 1.0% 1.0%1.0% 0.5% 0.5%0.5% 1.0% 1.0%1.0% 0.5% 0.5%0.5% 1.0% 1.0%1.0% SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGESETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load 50ms/230VAC12ms/115VAC at full load 50ms/230VAC12ms/115VAC at full load50ms/230VAC12ms/115VAC at full load 90 ~ 264VAC 127 ~ 370VDC 90 ~ 264VAC 127 ~ 370VDC90 ~ 264VAC 127 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz47 ~ 63HzINPUT INPUTINPUT EFFICIENCY (Typ.) EFFICIENCY (Typ.)EFFICIENCY (Typ.) 74% 74%74% 79% 79%79% 83% 83%83% 84% 85% 86% 84% 85% 86%84% 85% 86%PROTECTION PROTECTIONPROTECTION ENVIRONMENT ENVIRONMENTENVIRONMENT AC CURRENT (Typ.) AC CURRENT (Typ.)AC CURRENT (Typ.) INRUSH CURRENT (Typ.) The LEAKAGE CURRENTNote.8 INRUSH CURRENT (Typ.) The LEAKAGE CURRENTNote.8INRUSH CURRENT (Typ.) The LEAKAGE CURRENTNote.8OVER LOAD OVER LOADOVER LOAD OVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.OVER VOLTAGE WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATIONOPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDSSAFETY STANDARDS 1.8 A/115VAC 1 A/230VAC 1.8 A/115VAC 1 A/230VAC1.8 A/115VAC 1 A/230VAC COLD START 60A/230VAC 30A/115VAC COLD START 60A/230VAC 30A/115VACCOLD START 60A/230VAC 30A/115VAC Earth leakage current < 150 a/264VAC , Touch current < 100 a/264VAC Earth leakage current < 150 a/264VAC , Touch current < 100 a/264VACEarth leakage current < 150 a/264VAC , Touch current < 100 a/264VAC 115 ~ 150% rated output power 115 ~ 150% rated output power115 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removedProtection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 5V5.75 ~ 6.75 13.8 V ~ 16.2 V 17.25 ~ 20.25 V 28.4 ~ 32.4 V 55.2 ~ 64.8 V Protection type :Shut down o/p voltage, re-power on to recover 3.8 ~ 5V5.75 ~ 6.75 13.8 V ~ 16.2 V 17.25 ~ 20.25 V 28.4 ~ 32.4 V 55.2 ~ 64.8 V Protection type :Shut down o/p voltage, re-power on to recover3.8 ~ 5V5.75 ~ 6.75 13.8 V ~ 16.2 V 17.25 ~ 20.25 V 28.4 ~ 32.4 V 55.2 ~ 64.8 V Protection type :Shut down o/p voltage, re-power on to recover -20 ~ +70c (Refer to "Reduction Curve") -20 ~ +70c (Refer to "Reduction Curve")-20 ~ +70c (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH -40 ~ +85℃, 10 ~ 95% RH-40 ~ +85℃, 10 ~ 95% RH 0.03%/c (0 ~ 45 ° c) 0.03%/c (0 ~ 45 ° c)0.03%/c (0 ~ 45 ° c) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approvedUL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved SECURITY and SECURITY andSECURITY and ISOLATION LEVELPrimary-Secondary: 2xMOPP, Primary-Earth:1xMOPP, Secondary-Earth:1xMOPP ISOLATION LEVELPrimary-Secondary: 2xMOPP, Primary-Earth:1xMOPP, Secondary-Earth:1xMOPPISOLATION LEVELPrimary-Secondary: 2xMOPP, Primary-Earth:1xMOPP, Secondary-Earth:1xMOPP EMC EMCEMC RESISTANCE TO STRESS RESISTANCE TO STRESSRESISTANCE TO STRESS I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:1.5 KVAC I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:1.5 KVACI/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:1.5 KVAC (Note 5) (Note 5)(Note 5) INSULATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25c/ 70% RH INSULATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25c/ 70% RHINSULATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25c/ 70% RH OTHER OTHEROTHER EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC EMISSION EMC IMMUNITY MTBF DIMENSIONEMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGINGPACKAGING Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria ACompliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A 353.6 K hrs min.MIL-HDBK-217F (25c) 353.6 K hrs min.MIL-HDBK-217F (25c)353.6 K hrs min.MIL-HDBK-217F (25c) 101.6*50.8*29 mm (L*W*H) 101.6*50.8*29 mm (L*W*H)101.6*50.8*29 mm (L*W*H) 0.15 Kg; 96pcs/15.4 Kg/0.89 CUFT 0.15 Kg; 96pcs/15.4 Kg/0.89 CUFT0.15 Kg; 96pcs/15.4 Kg/0.89 CUFTNOTE NOTENOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 33% duty cycle maximumwithin every 30 seconds. Average output powershould does not exceed the ratedpower. 4. 33% duty cycle maximumwithin every 30 seconds. Average output powershould does not exceed the ratedpower.4. 33% duty cycle maximumwithin every 30 seconds. Average output powershould does not exceed the ratedpower. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)(asavailable in http://www.meanwell.com) 6. Lengthof set up time is measured at cold first start.Turn on/OFF the power supply may lead to increase of the start-up time. 6. Lengthof set up time is measured at cold first start.Turn on/OFF the power supply may lead to increase of the start-up time.6. Lengthof set up time is measured at cold first start.Turn on/OFF the power supply may lead to increase of the start-up time. 7. Heat sink HS1,HS2 can not be shorted. 7. Heat sink HS1,HS2 can not be shorted.7. Heat sink HS1,HS2 can not be shorted. 8. Touch currentwas measured from the main entrance to the DC output. 8. Touch currentwas measured from the main entrance to the DC output.8. Touch currentwas measured from the main entrance to the DC output.File name:RPS-60-SPEC2015-07-17 File name:RPS-60-SPEC2015-07-17File name:RPS-60-SPEC2015-07-17