Қоймада Танымал өнім
LS-H901-Y
LS-H901-Y PANASONIC Sensor head, retro reflective, range 1m, cable 2m, without reflector
$0.00USD
3232 қолжетімді
Негізгі сипаттамалар
Тауар:Specifications
Кабель:0.15 mm22-core two parallel shielded cables, 2 m 6.562 ft long(Note：Cable cannot be extended.)
Салмақ:Net weight: 50 g approx.Gross weight: 85 g approx.
Мәліметтер:Sensor heads(Coaxial retroreflective type)
Жеткізуші туралы ақпарат
PANASONIC
Өнімдер: 4316
Әдетте 2-3 жұмыс күні ішінде жіберіледі
Сапа кепілдігі
Жылдам жеткізу
Техникалық қолдау
Техникалық сипаттамалар
| Параметр | Құны |
|---|---|
| Тауар | Specifications |
| Кабель | 0.15 mm22-core two parallel shielded cables, 2 m 6.562 ft long(Note：Cable cannot be extended.) |
| Салмақ | Net weight: 50 g approx.Gross weight: 85 g approx. |
| Мәліметтер | Sensor heads(Coaxial retroreflective type) |
| Өнім | Amplifier-separated Type Digital Laser Sensor |
| Материал | Enclosure: PBTIndicator cover: PolycarbonateBeam-emitting / receiving surfaces: Glass |
| Қосалқы құрал | MS-LS-1(Mounting bracket): 1pc.RF-330(Refrector): 1pc. |
| Дақ өлшемі | Approx. dia. 6 mm dia. 0.236 in or less (at a distance from the sensor head of 1 m 3.281 ft) |
| Қорғаныс | IP40 (IEC) |
| Бөлшек нөмірі | LS-H901-Y |
| Өнім атауы | Amplifier-separated Type Digital Laser Sensor LS-500 |
| Өнім нөмірі | LS-H901-Y |
| Сезімтал нысан | Opaque, translucent, or transparent object(Note：Make sure to confirm detection with an actual sensor before use.) |
| Қоршаған ортаның ылғалдылығы | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Соққыға төзімділік | 100 m / s2 acceleration (10 G approx.) in X, Y and Z directions three times each |
| Сезу диапазоны: HYPR | 0.01 to 2.5m0.033 to 8.202 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Сенсорлық диапазон: U-LG | 0.01 to 2m0.033 to 6.562 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Қоршаған ортаның жарықтануы | Incandescent light: 3,000 ℓx or less at the light-receiving face |
| Қоршаған орта температурасы | -10 to +55degrees + 14 to + 131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70degrees -4 to +158 degrees Fahrenheit |
| Жұмыс индикаторы | Orange LED (lights up when the amplifier output is ON) |
| Дірілге төзімділік | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Қолданылатын күшейткіштер | LS-501(P), LS-501(P)-C2(Note：When using the thru-beam typeLS-H101□orLS-H102□, do not set the receiving light sensitivity (gctL) of the applicableLS-500series amplifier to level 2 or less. This is because there is a possibility of sensing becoming unstable.) |
| Сәулеленуші элемент: Түрі | Red semiconductor laser diode |
| Оқшаулауға төзімділік | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Сезу диапазоны: STD режимі | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Сезу диапазоны: ЖЫЛДАМ режим | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Сезу диапазоны: H-SP режимі | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Сенсорлық диапазон: U-LG режимі | 0.01 to 1.5m0.033 to 4.921 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Кернеуге төзімділік | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Сәулеленуші элемент: Лазер класы | Class 1 [IEC / JIS / FDA](Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and )Radiological Health) under the FDA (Food and Drug Administration). |
| Шығарушы элемент: Максималды шығыс | 1mW |
| CE белгісі директивасына сәйкестік | EMC Directive, RoHS Directive |
| Сәулелену элементі: ең жоғары сәулелену толқын ұзындығы | 660 nm 0.026 mil |
Өнім сипаттамасы
More details
Негізгі ерекшеліктер
- Өнеркәсіптік деңгейдегі сапа
- RoHS талаптарына сәйкес
- CE сертификатталған
- 1 жыл кепілдік
Өнім құжаттары
Техникалық сипаттама
Техникалық сипаттамалар және өнімділік деректері
Пайдаланушы нұсқаулығы
Орнату және пайдалану нұсқаулығы
