HSN-300-4.2A

300W Single Output Switching Power Supply 300W Single Output Switching Power Supply300W Single Output Switching Power Supply HSN-300series HSN-300seriesHSN-300seriesFeatures : Features :Features : Low leakagecurrent81mA Low leakagecurrent81mALow leakagecurrent81mA Protections: Short circuit/ Overload / Over voltage/ Over temperature Protections: Short circuit/ Overload / Over voltage/ Over temperatureProtections: Short circuit/ Overload / Over voltage/ Over temperature Cooling by free air convection Cooling by free air convectionCooling by free air convection Low profile:31mm Low profile:31mmLow profile:31mm Conformal coated Conformal coatedConformal coated LED indicator for power on LED indicator for power onLED indicator for power on Low cost, high power reliability Low cost, high power reliabilityLow cost, high power reliability 100% full load burn-in test 100% full load burn-in test100% full load burn-in test 2 years warranty 2 years warranty2 years warranty SPECIFICATION SPECIFICATIONSPECIFICATION MODEL MODELMODEL DC VOLTAGE DC VOLTAGEDC VOLTAGE HSN-300-4.2A HSN-300-4.2AHSN-300-4.2A 4.2V 4.2V4.2V HSN-300-4.2B HSN-300-4.2BHSN-300-4.2B 4.2V 4.2V4.2V HSN-300-5A HSN-300-5AHSN-300-5A 5V 5V5V HSN-300-5B HSN-300-5BHSN-300-5B 5V 5V5V RATED CURRENTNote.2 50A RATED CURRENTNote.2 50ARATED CURRENTNote.2 50A 60A 60A60A 50A 50A50A 60A 60A60A CURRENT RANGE CURRENT RANGECURRENT RANGE RATED POWER(convection) RATED POWER(convection)RATED POWER(convection) 0 ~ 50A 0 ~ 50A0 ~ 50A 210W 210W210W 0 ~ 60A 0 ~ 60A0 ~ 60A 252W 252W252W 0 ~ 50A 0 ~ 50A0 ~ 50A 250W 250W250W 0 ~ 60A 0 ~ 60A0 ~ 60A 300W 300W300W OUTPUT OUTPUTOUTPUT RIPPLE & NOISE (max.) Note.3 150mVp-p RIPPLE & NOISE (max.) Note.3 150mVp-pRIPPLE & NOISE (max.) Note.3 150mVp-p 150mVp-p 150mVp-p150mVp-p 150mVp-p 150mVp-p150mVp-p 150mVp-p 150mVp-p150mVp-p VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4 VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4 LINE REGULATION LINE REGULATIONLINE REGULATION LOAD REGULATION LOAD REGULATIONLOAD REGULATION 3.6~4.4V 3.6~4.4V3.6~4.4V 3.0% 3.0%3.0% 0.5% 0.5%0.5% 2.0% 2.0%2.0% 3.6~4.4V 3.6~4.4V3.6~4.4V 3.0% 3.0%3.0% 0.5% 0.5%0.5% 2.0% 2.0%2.0% 4.5~5.5V 4.5~5.5V4.5~5.5V 3.0% 3.0%3.0% 0.5% 0.5%0.5% 2.0% 2.0%2.0% 4.5~5.5V 4.5~5.5V4.5~5.5V 3.0% 3.0%3.0% 0.5% 0.5%0.5% 2.0% 2.0%2.0% SETUP, RISE TIME HOLD UP TIME (Typ.) SETUP, RISE TIME HOLD UP TIME (Typ.)SETUP, RISE TIME HOLD UP TIME (Typ.) 2500ms, 100ms/230VAC; 2500ms, 100ms/115VAC 2500ms, 100ms/230VAC; 2500ms, 100ms/115VAC2500ms, 100ms/230VAC; 2500ms, 100ms/115VAC 10ms/230VAC;8ms/115VAC at full load 10ms/230VAC;8ms/115VAC at full load10ms/230VAC;8ms/115VAC at full load VOLTAGE RANGE90~132VAC or 254~373VDC 180~264VAC or 254~373VDC 90~132VAC or 254~373VDC 180~264VAC or 254~373VDC VOLTAGE RANGE90~132VAC or 254~373VDC 180~264VAC or 254~373VDC 90~132VAC or 254~373VDC 180~264VAC or 254~373VDCVOLTAGE RANGE90~132VAC or 254~373VDC 180~264VAC or 254~373VDC 90~132VAC or 254~373VDC 180~264VAC or 254~373VDC INPUT INPUTINPUT FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.)FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) INRUSH CURRENT (Typ.)INRUSH CURRENT (Typ.) LEAKAGE CURRENT LEAKAGE CURRENTLEAKAGE CURRENT 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz 85% 85%85% 3.0A/230VAC;5.0A/115VAC Cold start 90A/230VAC 3.0A/230VAC;5.0A/115VAC Cold start 90A/230VAC3.0A/230VAC;5.0A/115VAC Cold start 90A/230VAC <1mA <1mA<1mA86% 86%86%OVERLOAD OVERLOADOVERLOAD A Type:105~170% rated output powerB Type:105~140% rated output power A Type:105~170% rated output powerB Type:105~140% rated output powerA Type:105~170% rated output powerB Type:105~140% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removedProtection type : Hiccup mode, recovers automatically after fault condition is removedPROTECTION PROTECTIONPROTECTION SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removedSHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed 4.7 ~ 5.7V 4.7 ~ 5.7V4.7 ~ 5.7V 5.7 ~ 7.0V 5.7 ~ 7.0V5.7 ~ 7.0VENVIRONMENT ENVIRONMENTENVIRONMENT SAFETY & EMC SAFETY & EMCSAFETY & EMC (Note 5) (Note 5)(Note 5) OTHERS OTHERSOTHERS OVER VOLTAGE OVER VOLTAGEOVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITYOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY STORAGE TEMP., HUMIDITYSTORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATIONTEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDSSAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSIONWITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSIONEMC IMMUNITY MTBF DIMENSION PACKING PACKINGPACKING Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removedProtection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Shut down O/P voltage, recovers automatically after temperature goes down Protection type : Shut down O/P voltage, recovers automatically after temperature goes downProtection type : Shut down O/P voltage, recovers automatically after temperature goes down -20 ~ +70(Refer to "Derating Curve") -20 ~ +70(Refer to "Derating Curve")-20 ~ +70(Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH -40 ~ +85, 10 ~ 95% RH-40 ~ +85, 10 ~ 95% RH 0.03%/ (0 ~ 60) 0.03%/ (0 ~ 60)0.03%/ (0 ~ 60) 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1 approved UL60950-1 approvedUL60950-1 approved I/P-O/P:3.0KVAC I/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P:3.0KVAC I/P-FG:2KVACO/P-FG:0.5KVACI/P-O/P:3.0KVAC I/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Refer to EN55022 (CISPR22) Class A I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Refer to EN55022 (CISPR22) Class AI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Refer to EN55022 (CISPR22) Class A Refer to EN61000-4-5; light industry level (surge 4KV),criteria A Refer to EN61000-4-5; light industry level (surge 4KV),criteria ARefer to EN61000-4-5; light industry level (surge 4KV),criteria A 226.4K hrs min.MIL-HDBK-217F (25) 226.4K hrs min.MIL-HDBK-217F (25)226.4K hrs min.MIL-HDBK-217F (25) 210*81*31mm (L*W*H) 210*81*31mm (L*W*H)210*81*31mm (L*W*H) 0.67kg; 20pcs/14.4kg/0.91CUFT 0.67kg; 20pcs/14.4kg/0.91CUFT0.67kg; 20pcs/14.4kg/0.91CUFT NOTE NOTENOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature.1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 2. Please refer to"static characteristics". 2. Please refer to"static characteristics".2. Please refer to"static characteristics". 3. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 4. Tolerance : line regulation and load regulation. 4. Tolerance : line regulation and load regulation.4. Tolerance : line regulation and load regulation. 5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details.5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 6. The powersupply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 6. The powersupply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets6. The powersupply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. EMC directives.EMC directives.File Name:HSN-300-SPEC2014-12-09 File Name:HSN-300-SPEC2014-12-09File Name:HSN-300-SPEC2014-12-09