HSN-200-5A

200W Single Output Switching Power Supply 200W Single Output Switching Power Supply200W Single Output Switching Power Supply HSN-200series HSN-200seriesHSN-200seriesFeatures : Features :Features : Low leakage current 1mA Low leakage current 1mALow leakage current 1mA Protections: Short circuit/ Overload / Over voltage/ Over temperature Protections: Short circuit/ Overload / Over voltage/ Over temperatureProtections: Short circuit/ Overload / Over voltage/ Over temperature Coolingby aluminum plate or the cabinet Coolingby aluminum plate or the cabinetCoolingby aluminum plate or the cabinet Low profile:31mm Low profile:31mmLow profile:31mm Conformal coated Conformal coatedConformal coated LED indicator for power on LED indicator for power onLED indicator for power on Low cost, high power reliability Low cost, high power reliabilityLow cost, high power reliability 100% full load burn-in test 100% full load burn-in test100% full load burn-in test 2 years warranty 2 years warranty2 years warranty SPECIFICATION SPECIFICATIONSPECIFICATION MODEL MODELMODEL DC VOLTAGE DC VOLTAGEDC VOLTAGE HSN-200-4.2A HSN-200-4.2AHSN-200-4.2A 4.2V 4.2V4.2V HSN-200-4.2B HSN-200-4.2BHSN-200-4.2B 4.2V 4.2V4.2V HSN-200-5A HSN-200-5AHSN-200-5A 5V 5V5V HSN-200-5B HSN-200-5BHSN-200-5B 5V 5V5V RATED CURRENTNote.2 30A RATED CURRENTNote.2 30ARATED CURRENTNote.2 30A 40A 40A40A 30A 30A30A 40A 40A40A CURRENT RANGE CURRENT RANGECURRENT RANGE RATED POWER(convection) RATED POWER(convection)RATED POWER(convection) 0 ~ 30A 0 ~ 30A0 ~ 30A 126W 126W126W 0 ~ 40A 0 ~ 40A0 ~ 40A 168W 168W168W 0 ~ 30A 0 ~ 30A0 ~ 30A 150W 150W150W 0 ~ 40A 0 ~ 40A0 ~ 40A 200W 200W200W RIPPLE & NOISE (max.) Note.3150mVp-p RIPPLE & NOISE (max.) Note.3150mVp-pRIPPLE & NOISE (max.) Note.3150mVp-p 150mVp-p 150mVp-p150mVp-p 150mVp-p 150mVp-p150mVp-p 150mVp-p 150mVp-p150mVp-p OUTPUT OUTPUTOUTPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4 VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4 LINE REGULATION LINE REGULATIONLINE REGULATION LOAD REGULATION LOAD REGULATIONLOAD REGULATION 3.6~4.4V 3.6~4.4V3.6~4.4V 2.0% 2.0%2.0% 0.5% 0.5%0.5% 2.0% 2.0%2.0% 3.6~4.4V 3.6~4.4V3.6~4.4V 2.0% 2.0%2.0% 0.5% 0.5%0.5% 2.0% 2.0%2.0% 4.5~5.5V 4.5~5.5V4.5~5.5V 2.0% 2.0%2.0% 0.5% 0.5%0.5% 2.0% 2.0%2.0% 4.5~5.5V 4.5~5.5V4.5~5.5V 2.0% 2.0%2.0% 0.5% 0.5%0.5% 2.0% 2.0%2.0% SETUP, RISE TIME HOLD UP TIME (Typ.) SETUP, RISE TIME HOLD UP TIME (Typ.)SETUP, RISE TIME HOLD UP TIME (Typ.) 1500ms, 100ms/230VAC2500ms, 100ms/115VAC 1500ms, 100ms/230VAC2500ms, 100ms/115VAC1500ms, 100ms/230VAC2500ms, 100ms/115VAC 20ms/230VAC16ms/115VAC at full load 20ms/230VAC16ms/115VAC at full load20ms/230VAC16ms/115VAC at full loadINPUT INPUTINPUT VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) AC CURRENT (Typ.)AC CURRENT (Typ.) 90~132VAC or 254~373VDC 90~132VAC or 254~373VDC90~132VAC or 254~373VDC 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz 86.5% 86.5%86.5% 3.0A/115VAC 2.5A/230VAC 3.0A/115VAC 2.5A/230VAC3.0A/115VAC 2.5A/230VAC 180~264VAC or 254~373VDC 180~264VAC or 254~373VDC180~264VAC or 254~373VDC88% 88%88% 90~132VAC or254~373VDC 90~132VAC or254~373VDC90~132VAC or254~373VDC86.5% 86.5%86.5% 180~264VAC or 254~373VDC 180~264VAC or 254~373VDC180~264VAC or 254~373VDC88% 88%88% INRUSH CURRENT (Typ.) LEAKAGE CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENTINRUSH CURRENT (Typ.) LEAKAGE CURRENTOVERLOAD OVERLOADOVERLOAD COLD START <80A(twidth<1000s measured at 50% Ipeak) at 115/230VAC COLD START <80A(twidth<1000s measured at 50% Ipeak) at 115/230VACCOLD START <80A(twidth<1000s measured at 50% Ipeak) at 115/230VAC <1mA <1mA<1mA A Type:105~185% rated output powerB Type:105~140% rated output power A Type:105~185% rated output powerB Type:105~140% rated output powerA Type:105~185% rated output powerB Type:105~140% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removedProtection type : Hiccup mode, recovers automatically after fault condition is removedPROTECTION PROTECTIONPROTECTION SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removedSHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed 4.6 ~ 5.4V 4.6 ~ 5.4V4.6 ~ 5.4V 5.7 ~ 7.0V 5.7 ~ 7.0V5.7 ~ 7.0VENVIRONMENT ENVIRONMENTENVIRONMENT SAFETY & EMC SAFETY & EMCSAFETY & EMC (Note 5) (Note 5)(Note 5) OTHERS OTHERSOTHERS OVER VOLTAGE OVER VOLTAGEOVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITYOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY STORAGE TEMP., HUMIDITYSTORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATIONTEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDSSAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSIONWITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSIONEMC IMMUNITY MTBF DIMENSION PACKING PACKINGPACKING Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removedProtection type : Hiccup mode, recovers automatically after fault condition is removed Shut down O/P voltage, recovers automatically after temperature goes down Shut down O/P voltage, recovers automatically after temperature goes downShut down O/P voltage, recovers automatically after temperature goes down -25 ~ +70(Refer to "Derating Curve") -25 ~ +70(Refer to "Derating Curve")-25 ~ +70(Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH -40 ~ +85, 10 ~ 95% RH-40 ~ +85, 10 ~ 95% RH 0.03%/ (0 ~ 60) 0.03%/ (0 ~ 60)0.03%/ (0 ~ 60) 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1 approved UL60950-1 approvedUL60950-1 approved I/P-O/P:3.0KVAC I/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P:3.0KVAC I/P-FG:2KVACO/P-FG:0.5KVACI/P-O/P:3.0KVAC I/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Refer to EN55022 (CISPR22) Class A I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Refer to EN55022 (CISPR22) Class AI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Refer to EN55022 (CISPR22) Class A Refer to EN61000-4-5; 4KV, criteria A Refer to EN61000-4-5; 4KV, criteria ARefer to EN61000-4-5; 4KV, criteria A 283.069K hrs min.MIL-HDBK-217F (25) 283.069K hrs min.MIL-HDBK-217F (25)283.069K hrs min.MIL-HDBK-217F (25) 210*62*31mm (L*W*H) 210*62*31mm (L*W*H)210*62*31mm (L*W*H) 0.55kg; 20pcs/12kg/1.63CUFT 0.55kg; 20pcs/12kg/1.63CUFT0.55kg; 20pcs/12kg/1.63CUFT NOTE NOTENOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature.1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 2. Please refer to"static characteristics". 2. Please refer to"static characteristics".2. Please refer to"static characteristics". 3. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 4. Tolerance : line regulation and load regulation. 4. Tolerance : line regulation and load regulation.4. Tolerance : line regulation and load regulation. 5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details.5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. EMC directives.EMC directives.File Name:HSN-200-SPEC2014-12-09 File Name:HSN-200-SPEC2014-12-09File Name:HSN-200-SPEC2014-12-09