HLG-320H-48C

320 W Single Output switching Power supply 320 W Single Output switching Power supply320W Single Output Switching Power SupplyFeatures : Features :Features : GAN-320Hseries GAN-320HseriesGAN-320Hseries Universal AC input / Full range (up to 305VAC) Universal AC input / Full range (up to 305VAC)Universal AC input / Full range (up to 305VAC) Built-in active PFCfunction Built-in active PFCfunctionBuilt-in active PFCfunction High efficiencyup to 95% High efficiencyup to 95%High efficiencyup to 95% Protections: short circuit / Over current / Over voltage / Over temperature Protections: short circuit / Over current / Over voltage / Over temperatureProtections: short circuit / Over current / Over voltage / Over temperature Cooling by convection freeair Cooling by convection freeairCooling by convection freeair OCP point adjustable through outputcable or internal potentiometer OCP point adjustable through outputcable or internal potentiometerOCP point adjustable through outputcable or internal potentiometer IP67 / IP65design to indooror outdoor facilities IP67 / IP65design to indooror outdoor facilitiesIP67 / IP65design to indooror outdoor facilities Type HL LED Driver for use in Class I, Division 2 hazardous location luminaires Type HL LED Driver for use in Class I, Division 2 hazardous location luminairesType HL LED Driver for use in Class I, Division 2 hazardous location luminaires Three in onedimmingfunction(1*10Vdc or PWM signalor resistance) Three in onedimmingfunction(1*10Vdc or PWM signalor resistance)Three in onedimmingfunction(1*10Vdc or PWM signalor resistance) Suitable for LED lighting andstreet lighting applications Suitable for LED lighting andstreet lighting applicationsSuitable for LED lighting andstreet lighting applications The compliance of the international norms of safety for the lighting The compliance of the international norms of safety for the lightingThe compliance of the international norms of safety for the lighting Suitable for dry / damp / wet location Suitable for dry / damp / wet locationSuitable for dry / damp / wet location 7 years warranty (Note.10) 7 years warranty (Note.10)7 years warranty (Note.10)F110 F110F110M MSELV IP65 IP67 M MSELV IP65 IP67M MSELV IP65 IP67 Bauar t gepr u f t Bauar t gepr u f tBauar t gepr u f t Sicherheit egel ma ge Sicherheit egel ma geSicherheit egel ma ge od os od osod os be wacg be wacgbe wacg www. tuv. com www. tuv. comwww. tuv. com ID 2000000000 ID 2000000000ID 2000000000HLG-320H-12A HLG-320H-12AHLG-320H-12A Blank : IP67 rated. I/O Cable connection. Blank : IP67 rated. I/O Cable connection.Blank : IP67 rated. I/O Cable connection. R : IP65rated. Outputvoltage and constant current level can be adjusted through internal potentiometer. R : IP65rated. Outputvoltage and constant current level can be adjusted through internal potentiometer.R : IP65rated. Outputvoltage and constant current level can be adjusted through internal potentiometer. B : IP67rated. Constant current level adjustable through outputcable with 1*10Vdc or PWM signalor resistance. C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal B : IP67rated. Constant current level adjustable through outputcable with 1*10Vdc or PWM signalor resistance. C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internalB : IP67rated. Constant current level adjustable through outputcable with 1*10Vdc or PWM signalor resistance. C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal the potentiometer. the potentiometer.the potentiometer. D (option) : IP67rated. Timer dimmingfunction,contact mean WELL for details. D (option) : IP67rated. Timer dimmingfunction,contact mean WELL for details.D (option) : IP67rated. Timer dimmingfunction,contact mean WELL for details.SPECIFICATION SPECIFICATIONSPECIFICATION MODEL MODELMODEL HLG-320H-12 HLG-320H-15 HLG-320H-20 HLG-320H-24 HLG-320H-30 HLG-320H-36 HLG-320H-12 HLG-320H-15 HLG-320H-20 HLG-320H-24 HLG-320H-30 HLG-320H-36HLG-320H-12 HLG-320H-15 HLG-320H-20 HLG-320H-24 HLG-320H-30 HLG-320H-36 HLG-320H-42 HLG-320H-42HLG-320H-42 HLG-320H-48 HLG-320H-48HLG-320H-48 HLG-320H-54 HLG-320H-54HLG-320H-54 THE DC VOLTAGE THE DC VOLTAGETHE DC VOLTAGE 12V 12V12V 15V 15V15V 20V 20V20V 24V 24V24V 30V 30V30V 36V 36V36V 42V 42V42V 48V 48V48V 54V 54V54V CONSTANT CURRENT REGION Note.46 ~12V CONSTANT CURRENT REGION Note.46 ~12VCONSTANT CURRENT REGION Note.46 ~12V 7.5 ~ 15V 7.5 ~ 15V7.5 ~ 15V 10 ~ 20V 10 ~ 20V10 ~ 20V 12 ~ 24V 12 ~ 24V12 ~ 24V 15 ~ 30V 15 ~ 30V15 ~ 30V 18 ~ 36V 18 ~ 36V18 ~ 36V 21 ~ 42V 21 ~ 42V21 ~ 42V 24 ~ 48V 24 ~ 48V24 ~ 48V 27 ~ 54V 27 ~ 54V27 ~ 54V NOMINAL CURRENT NOMINAL POWER NOMINAL CURRENT NOMINAL POWERNOMINAL CURRENT NOMINAL POWER 22A 19A15A13.34A 10.7 8.9 A 22A 19A15A13.34A 10.7 8.9 A22A 19A15A13.34A 10.7 8.9 A 264W285W 300W 320.16W321W 320.4 W 264W285W 300W 320.16W321W 320.4 W264W285W 300W 320.16W321W 320.4 W 7.65 A 7.65 A7.65 A 321.3 W 321.3 W321.3 W 6.7 A 6.7 A6.7 A 321.6 W 321.6 W321.6 W 5.95 5.955.95 321.3 W 321.3 W321.3 W RIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-p RIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-pRIPPLE & NOISE (max.)Note.2 150mVp-p150mVp-p VOLTAGE ADJ. RANGE of Note.610.8 ~ 13.5V13.5 ~ 17V VOLTAGE ADJ. RANGE of Note.610.8 ~ 13.5V13.5 ~ 17VVOLTAGE ADJ. RANGE of Note.610.8 ~ 13.5V13.5 ~ 17V 150mVp-p 150mVp-p150mVp-p 17 ~ 22V 17 ~ 22V17 ~ 22V 150mVp-p 150mVp-p150mVp-p 21 ~ 26V 21 ~ 26V21 ~ 26V 200mVp-p 200mVp-p200mVp-p 26 ~ 32V 26 ~ 32V26 ~ 32V 250mVp-p 250mVp-p250mVp-p 32 ~ 39V 32 ~ 39V32 ~ 39V 250mVp-p 250mVp-p250mVp-p 38 ~ 45V 38 ~ 45V38 ~ 45V 250mVp-p 250mVp-p250mVp-p 43 ~ 52V 43 ~ 52V43 ~ 52V 350mVp-p 350mVp-p350mVp-p 49 ~ 58V 49 ~ 58V49 ~ 58V OUTPUT OUTPUTOUTPUTCURRENT ADJ. RANGE of CURRENT ADJ. RANGE ofCURRENT ADJ. RANGE of Can be adjusted by internal potentiometer a type and C type only Can be adjusted by internal potentiometer a type and C type onlyCan be adjusted by internal potentiometer a type and C type only 11 ~ 22A 11 ~ 22A11 ~ 22A 9.5 ~ 19A 9.5 ~ 19A9.5 ~ 19A 7.5 ~ 15A 7.5 ~ 15A7.5 ~ 15A 6.67 ~ 13.34A5.35 ~ 10.7 A 4.45 ~ 8.9 A 6.67 ~ 13.34A5.35 ~ 10.7 A 4.45 ~ 8.9 A6.67 ~ 13.34A5.35 ~ 10.7 A 4.45 ~ 8.9 A 3.8 ~ 7.65 A 3.8 ~ 7.65 A3.8 ~ 7.65 A 3.35 ~ 6.7 A 3.35 ~ 6.7 A3.35 ~ 6.7 A 2.97 ~ 5.95 2.97 ~ 5.952.97 ~ 5.95 VOLTAGE TOLERANCENote.33.0% VOLTAGE TOLERANCENote.33.0%VOLTAGE TOLERANCENote.33.0% 2.0% 2.0%2.0% 1.5% 1.5%1.5% 1.0% 1.0%1.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATIONLINE REGULATION LOAD REGULATION 0.5%0.5%0.5%0.5%0.5%0.5% 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5% 2.0%1.5%1.0%0.5%0.5%0.5% 2.0%1.5%1.0%0.5%0.5%0.5%2.0%1.5%1.0%0.5%0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% SETUP, RISE TIMENote.82500ms,80ms/115VAC500ms,80ms/230VAC at full load SETUP, RISE TIMENote.82500ms,80ms/115VAC500ms,80ms/230VAC at full loadSETUP, RISE TIMENote.82500ms,80ms/115VAC500ms,80ms/230VAC at full load HOLD TIME (Typ.) HOLD TIME (Typ.)HOLD TIME (Typ.) 15ms at full load 230VAC /115VAC 15ms at full load 230VAC /115VAC15ms at full load 230VAC /115VAC VOLTAGE RANGENote.5 90 ~ 305VAC127 ~ 431VDC VOLTAGE RANGENote.5 90 ~ 305VAC127 ~ 431VDCVOLTAGE RANGENote.5 90 ~ 305VAC127 ~ 431VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz PF>0.98/115VAC,PF>0.95/230VAC,PF>0.94/277VACat full load (please refer to "Power Factor Characteristic" curve) PF>0.98/115VAC,PF>0.95/230VAC,PF>0.94/277VACat full load (please refer to "Power Factor Characteristic" curve)PF>0.98/115VAC,PF>0.95/230VAC,PF>0.94/277VACat full load (please refer to "Power Factor Characteristic" curve) The TOTAL HARMONIC DISTORTION THD< 20% when output loading 50% at 115VAC/230VACinput and output loading 75% at 277VAC input The TOTAL HARMONIC DISTORTION THD< 20% when output loading 50% at 115VAC/230VACinput and output loading 75% at 277VAC inputThe TOTAL HARMONIC DISTORTION THD< 20% when output loading 50% at 115VAC/230VACinput and output loading 75% at 277VAC inputINPUT INPUTINPUT EFFICIENCY (Typ.) (230Vac) EFFICIENCY (Typ.) (277Vac) EFFICIENCY (Typ.) (230Vac) EFFICIENCY (Typ.) (277Vac)EFFICIENCY (Typ.) (230Vac) EFFICIENCY (Typ.) (277Vac) 91% 91%91% 91.5% 91.5%91.5% 92.5% 92.5%92.5% 93% 93%93% 93.5% 93.5%93.5% 94% 94%94% 94% 94%94% 94.5% 94.5%94.5% 94% 94%94% 94.5% 94.5%94.5% 94.5% 94.5%94.5% 95% 95%95% 95% 95%95% 95% 95%95% 95% 95%95% 95% 95%95% 95% 95%95% 95% 95%95% AC CURRENT (Typ.) INRUSH CURRENT(Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.)AC CURRENT (Typ.) INRUSH CURRENT(Typ.) MAX. No. of the systems of power in the 16TH MAX. No. of the systems of power in the 16THMAX. No. of the systems of power in the 16TH 3.5 A / 115VAC1.65A / 230VAC1.45A / 277VAC 3.5 A / 115VAC1.65A / 230VAC1.45A / 277VAC3.5 A / 115VAC1.65A / 230VAC1.45A / 277VAC COLD start 70A(twidth=1010s measured at 50% Ipeak) at 230VAC COLD start 70A(twidth=1010s measured at 50% Ipeak) at 230VACCOLD start 70A(twidth=1010s measured at 50% Ipeak) at 230VAC CIRCUIT BREAKER1 unit (circuit breaker type B) / 2 units(circuit breaker type C) 230VAC CIRCUIT BREAKER1 unit (circuit breaker type B) / 2 units(circuit breaker type C) 230VACCIRCUIT BREAKER1 unit (circuit breaker type B) / 2 units(circuit breaker type C) 230VAC THE LEAKAGE CURRENT THE LEAKAGE CURRENTTHE LEAKAGE CURRENT <0.75 mA / 277VAC <0.75 mA / 277VAC<0.75 mA / 277VAC MOST of CURRENTNote.495 ~ 108% MOST of CURRENTNote.495 ~ 108%MOST of CURRENTNote.495 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removedProtection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removedSHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed PROTECTION PROTECTIONPROTECTIONOVER VOLTAGE OVER VOLTAGEMOST OF VOLTAGEOVER TEMPERATURE WORKING TEMP. THE OVER TEMPERATURE WORKING TEMP.THE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY WORKING HUMIDITYWORKING HUMIDITY 14 ~ 17V17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V33 ~ 37V40 ~ 46V Protection type : Shut down and latch off o/p voltage, re-power on to recover 14 ~ 17V17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V33 ~ 37V40 ~ 46V Protection type : Shut down and latch off o/p voltage, re-power on to recover14 ~ 17V17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V33 ~ 37V40 ~ 46V Protection type : Shut down and latch off o/p voltage, re-power on to recover Shut down and latch off o/p voltage, re-power on to recover Shut down and latch off o/p voltage, re-power on to recoverShut down and latch off o/p voltage, re-power on to recover -40 ~ +70c (Refer to "Reduction Curve") -40 ~ +70c (Refer to "Reduction Curve")-40 ~ +70c (Refer to "Reduction Curve") 20 ~ 95% RH non-condensing 20 ~ 95% RH non-condensing20 ~ 95% RH non-condensing 46.5 ~ 53V 46.5 ~ 53V46.5 ~ 53V 53.5 ~ 60V 53.5 ~ 60V53.5 ~ 60V 59 ~ 65V 59 ~ 65V59 ~ 65V ENVIRONMENT STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION ENVIRONMENT STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATIONENVIRONMENT STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION STANDARDS of SAFETY of the Note.7 STANDARDS of SAFETY of the Note.7STANDARDS of SAFETY of the Note.7WITHSTAND VOLTAGE RESISTANCE TO STRESSRESISTANCE TO STRESS -40 ~ +80c, 10 ~ 95% RH -40 ~ +80c, 10 ~ 95% RH-40 ~ +80c, 10 ~ 95% RH 0.03%/c (0 ~ 50 ° c) 0.03%/c (0 ~ 50 ° c)0.03%/c (0 ~ 50 ° c) 10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, y, Z axes 10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, y, Z axes10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, y, Z axes UL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent, IP65 or IP67 (except for HLG-320H C type), J61347-1, J61347-2-13 (except for HLG-320H C type) approved UL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent, IP65 or IP67 (except for HLG-320H C type), J61347-1, J61347-2-13 (except for HLG-320H C type) approvedUL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent, IP65 or IP67 (except for HLG-320H C type), J61347-1, J61347-2-13 (except for HLG-320H C type) approved I/P-O/P:3.75 KVACI/P-FG:2KVACO/P-FG:1.5 KVAC I/P-O/P:3.75 KVACI/P-FG:2KVACO/P-FG:1.5 KVACI/P-O/P:3.75 KVACI/P-FG:2KVACO/P-FG:1.5 KVAC SECURITY and SECURITY andSECURITY and EMC EMCEMCOTHERS OTHEROTHER ISOLATION RESISTANCE EMC EMISSION ISOLATION RESISTANCE EMC EMISSIONISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSIONEMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGINGPACKAGING I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RHI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (50% load) ; EN61000-3-3 Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (50% load) ; EN61000-3-3Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (50% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria B Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria BCompliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria B 157.1 K hrs min.MIL-HDBK-217F(25c) 157.1 K hrs min.MIL-HDBK-217F(25c)157.1 K hrs min.MIL-HDBK-217F(25c) 252*90*43.8 mm(L*W*H) 252*90*43.8 mm(L*W*H)252*90*43.8 mm(L*W*H) 1.88 Kg; 8pcs/16Kg/0.92 CUFT 1.88 Kg; 8pcs/16Kg/0.92 CUFT1.88 Kg; 8pcs/16Kg/0.92 CUFTNOTE NOTENOTE 1. All parameters NOT specially mentioned are measured at 230vac input,rated loadand 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input,rated loadand 25 ° c ambient temperature.1. All parameters NOT specially mentioned are measured at 230vac input,rated loadand 25 ° c ambient temperature. 2. Ripple and noise are measured in 20MHzof of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Ripple and noise are measured in 20MHzof of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.2. Ripple and noise are measured in 20MHzof of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and loadregulation. 3. Tolerance : includes set up tolerance, line regulation and loadregulation.3. Tolerance : includes set up tolerance, line regulation and loadregulation. 4. Please referto "DRIVING METHODS OF LED MODULE". 4. Please referto "DRIVING METHODS OF LED MODULE".4. Please referto "DRIVING METHODS OF LED MODULE". 5. Power reduction may be necessary under low inputvoltages. Please check thestatic characteristics for more details. 5. Power reduction may be necessary under low inputvoltages. Please check thestatic characteristics for more details.5. Power reduction may be necessary under low inputvoltages. Please check thestatic characteristics for more details. 6. A type and C typeonly. 6. A type and C typeonly.6. A type and C typeonly. 7. Safety and EMC design referto EN60598-1, subject CNS15233, GB7000.1, FCCpart18. 7. Safety and EMC design referto EN60598-1, subject CNS15233, GB7000.1, FCCpart18.7. Safety and EMC design referto EN60598-1, subject CNS15233, GB7000.1, FCCpart18. 8. The length of set up timeis measured in coldfirst start. Turn on/OFF the supply of maylead to increase of theset time. 8. The length of set up timeis measured in coldfirst start. Turn on/OFF the supply of maylead to increase of theset time.8. The length of set up timeis measured in coldfirst start. Turn on/OFF the supply of maylead to increase of theset time. 9. The power supply is considered a component which will be operated in combination with final equipment. Since EMC performance will be affected by the 9. The power supply is considered a component which will be operated in combination with final equipment. Since EMC performance will be affected by the9. The power supply is considered a component which will be operated in combination with final equipment. Since EMC performance will be affected by the full installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete the installation again. full installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete the installation again.full installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete the installation again. 10.Please refer to the warranty statement. 10.Please refer to the warranty statement.10.Please refer to the warranty statement. 11. To comply with the requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently 11. To comply with the requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently11. To comply with the requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to themains. connected to themains.connected to themains. File name:HLG-320H-SPEC2015-08-19 File name:HLG-320H-SPEC2015-08-19File name:HLG-320H-SPEC2015-08-19