


| Параметр | Құны |
|---|---|
| Аты | HLG-240H-C1050AB |
| Штат | New |
| Пішімдеу | Box |
| Сериялар | HLG-240H-C-AB |
| Күңгірттеу | 1-10V, Resistance 0-100K, PWM Signal 10V |
| Мақұлдау | CCC, CE, EAC, ENEC, MM, RCM, UL |
| Қуат (Вт) | 249,90 |
| Ішкі формат | IP65 |
| Ені (мм) | 68.00 |
| Биіктігі (мм) | 38.80 |
| Айнымалы ток кірісінің макс. | 305,00 |
| Айнымалы ток кірісінің минимумы | 90,00 |
| Қолданбалар | Lighting |
| Өндіруші | MEAN WELL |
| Өнім түрі | LED Driver |
| Оқшаулау (V) | 3.750,00 |
| Ең жоғары қуат (Вт) | 249.9 |
| Кіріс қосқышы | Cable |
| Кіріс жиілігі | 50 Hz, 60 Hz |
| Ұзын/Фон | 244.20 |
| Ұзақ сипаттама | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in metal boxIP65.Input range90-305Vca47-63Hz.Output in constant current1050mA.Adjustable by external potentiometer (525-1050mA).Range of output voltage with current mode constant119 to 238Vccaccording to demand load.Power:249,9 W.Efficiency typical:93,5%.Potentiometer:This model incorporates 1 external potentiometer that allows us to regulate the maximum output current.Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%.Input class I with grounding.Factor corrector, power>0,95to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+90ºC.Dimensions (Length x Width x Height):244,2 x 68 x 38,8 mm7 years of warranty.Manufacturer: MEAN WELLThis source can work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current. In this version AB, the output current can be adjusted byexternal potentiometerlocated in the housing of the sourcein addition to having regulation 1-10V, 10V PWM, or resistance.The series HLG are LED drivers, class I grounded.With metal housing IP65. The series HLG has a high efficiency designed for applications of public lighting, architectural, exterior, interior or any lighting application LED needs a driver of high quality. Approved HL Class I Division 2 for ex-zones in the US. Suitable for LED lighting or LED displays. Complies with the requirements of security at the global level for lighting.Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Шығыс қосқышы | Cable |
| Кіру CA түрі | Single-phase |
| Кепілдік (жылдар) | 7,00 |
| Шыққан елі | China |
| Шығыс тогы мА | 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1050 |
| Минималды шығыс қарқындылығы (мА) | 525,00 |
| Шығыстың максималды қарқындылығы (мА) | 1.050,00 |
Техникалық сипаттамалар және өнімділік деректері
Орнату және пайдалану нұсқаулығы