G34305545115

Output ModuleType G 3430 5545Duline®FieldbusInstallationbus• 8-channel receiver• Relay load: 16A• Module load: 32A (16 A per relay)• Galvanically separated SPST relay outputs• H4-housing• For mounting on DIN-rail (EN 50022)• LED-indications for supply, Dupline® carrier and outputs• AC power supply• Address coding by GAP 1605Product Description Ordering KeyG 3430 5545 024Dupline receiver®designedto be a part of the Dupline® concept for Building Automa- tion.SPST relay outputsforType Selectioncontrolof8loadsofupto250 VAC/16 A.Type: Dupline® H4-housing ReceiverNumber of channelsOutput typePower supplySupply Specifications (cont.)Supply Ordering no.24 VACG3430 5545 024115 VACG3430 5545 115230 VACG3430 5545 230Output SpecificationsFail polarity state delayUpon loss of Dupline®carrier ≤ 20 msPower ON delaytyp. 2sIndication for:Supply ONLED, GreenDupline®carrierLED, YellowOutput ONLED, red (one per output)Outputs8 SPST relays Contact ratings (AgSn02)µ (micro gap) Resistive loadsAC116 AMechanical lifetime 5x106 operationsElectrical lifetime1x105 operations/250 V, 12 A Minimum load 100 mA/12 VOperating frequency 60 operations/min. Dielectric voltageOutputs – Dupline® ≥ 4 kVAC (rms)Response time≤ 1 pulse trainSupply SpecificationsPower SupplyOvervoltage cat. III(IEC 60664)EnvironmentDegree of protection IP 20Pollution degree 3 (IEC 60664)Operating temperature -5 to +50°C (+23° to +122°F) Storage temperature-50 to +85°C (-58° to +185°F)Humidity (non-condensing) 20 to 80%Mechanical resistanceShock5 G (11ms) Vibration 2 G (6 to 55Hz)Housing H4-housingWeight400 gMode of OperationRated operational voltageThrough term. 21 & 22230 VAC, +/- 10%(IEC 60038)115 VAC, +/- 10% (IEC 60038)24 VAC, +/- 10%Frequency 45 to 65 Hz Rated operational powerTyp. 2,5 VA Power dissipation≤ 4 W Rated impulse withstandvoltage 2304 kV1152,5 kV024800 V Dielectric voltageSupply – Dupline® ≥4 kVAC (rms) Supply – Outputs≥2 kVAC (rms)8-channel receiver with 8 normally open contact out- puts.Each outputis coded by means ofthe codepro- grammer GAP 1605. For changing the default setting, please refer to the datasheet on GAP 1605.The outputs are normally OFF. When a transmitter coded to the selected chan- nel is activated, the output turns ON and remains ON until the respective channel becomesdeactivated.Thedefault setting is such that upon loss of Dupline® carrier all the outputs go OFF.Note: At delivery some of the relays mightbeON dueto transportationbumps. To be sure that the relays are OFF, connect the module to power and Dupline and transmit on channels A1-8 once.Note:Due tothe construc- tion with bistable relays, the module is intended for heat- ing and light control only.Specifications are subject to change without notice (29.09.2005)1Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group