


| Параметр | Құны |
|---|---|
| NPN | - |
| COM3 | E3S-DCP21-IL3 |
| Тауар | Sensing method |
| Линза | Methacrylic resin (PMMA) |
| Модель | E3S-DCP21-IL2 |
| Шығыс | Push-pull |
| Түймелер | Elastomers |
| Бод жылдамдығы | E3S-DCP21-IL3: COM3 (230.4 kbps), E3S-DCP21-IL2: COM2 (38.4 kbps) |
| Қосқыш | Diecast zinc (nickel-plated brass) |
| Материалдар | Case |
| Индикаторлар | ABS |
| Деректер ұзындығы | PD size: 8 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) |
| Жауап беру уақыты | Operate or reset: 50 µs max. for each (2-point teaching mode)Operate or reset: 150 µs max. for each (1-point teaching mode) |
| Сезу әдісі | Appearance |
| Қашықтықты сезу | 10±3 mm (White paper 10 ×10 mm) |
| Ең аз цикл уақыты | E3S-DCP21-IL3 (COM3): 1.5 ms, E3S-DCP21-IL2 (COM2): 4.8 ms |
| Қорғаныс тізбектері | Power supply reverse polarity protection, output short-circuit protection and output incorrect connection protection |
| Қорғау дәрежесі | IEC 60529 IP67 |
| Қуат көзінің кернеуі | 10 to 30 VDC±10% (Ripple (p-p) 10% max.) |
| Негізгі IO-Link функциялары | Operation mode switching between NO and NCTimer function of the control output and timer time selecting function (Select a function from disabled, ON delay, OFF delay, one-shot or ON/OFF delay.) (Select a timer time of 1-5000 ms.)Selecting function of ON delay timer time for instability (0 (disabled)-1000 ms)Monitor output function (PD output indicating a relative detection quantity)Energizing time read-out function (unit: h)Initialize the settings function “Restore the factory settings” |
| Қоршаған орта температурасының диапазоны | Operating: −10 to 55°C; Storage: −25 to 70°C (with no icing or condensation) |
| Жарық көзі (толқын ұзындығы) | Red LED (635 nm), Green LED (525 nm), Blue LED (465 nm) |
| Дақ өлшемі (анықтамалық мән) | 1 × 4 mm |
| Байланыс сипаттамалары | IO-Link specification |
| Диффузиялық шағылыстырғыш (белгіні анықтау) |
Техникалық сипаттамалар және өнімділік деректері
Орнату және пайдалану нұсқаулығы