


| Параметр | Құны |
|---|---|
| Тауар | Specifications |
| Өнім | FP7 High-speed Counter Units |
| Бөлшек нөмірі | AFP7HSC4T |
| Өнім атауы | FP7 High-speed Counter |
| Өнім нөмірі | AFP7HSC4T |
| Кіріс: Оқшаулау әдісі | Photocoupler insulation |
| Кіріс: Номиналды кіріс кернеуі | 12 to 24 V DC / 3.5 to 5 V DC |
| Санау функциясы: Санауыш түрі | Linear counter / Ring counter |
| Санау функциясы: Сыртқы енгізу/шығару | Control signal input: 8 points (2 points/ch), External output: 8 points (2 points/ch) |
| Санау функциясы: Кіріс сигналы | Phases A, B and Z |
| Кіріс: Кіріс кедергісі: 5 В тұрақты ток | 390 Ohm (5 V DC) approx. |
| Санау функциясы: Санау диапазоны | Signed 32-bit (-2,147,483,648 to +2,147,483,647) |
| Кіріс: Кіріс кедергісі: 24 В тұрақты ток | 3.0 kOhm approx. |
| Санау функциясы: санауыштар саны | 4ch |
| Кіріс: Пайдалану кернеуінің диапазоны: 5 В тұрақты ток | 3.5 to 5.25 V DC |
| Басқа функциялар: Түсіру функциясы | Acquires the current count value from the edges of input signals, and stores it in the capture 0 register or capture 1 register. The value of the specified capture register will be overwritten by a new value and the old value will be discarded every time a counter value is captured. |
| Санау функциясы: Санауыш енгізу түрі | Individual input (Phases A and B): 1 multiple, 2-multipleDirection discrimination input: 1 multiple, 2-multiple2-phase input: 1 multiple, 2-multiple, 4-multiple |
| Кіріс: Кіріс уақытының тұрақты параметрі | None, 0.1 micro s, 0.2 micro s, 0.5 micro s, 1.0 micro s, 2.0 micro s and 10.0 micro s |
| Кіріс: Пайдалану кернеуінің диапазоны: 24 В тұрақты ток | 10.8 to 26.4 V DC |
| Санау функциясы: Максималды кіріс жиілігі | 4 MHz / 8 MHz for individual input (phases A and B) (Duty ratio 50 plus or minus 10 %), 4 MHz / 8 MHz for direction discrimination input (Duty ratio 50 plus or minus 10 %), 4 MHz / 8 MHz /16 MHz for 2-phase input (Duty ratio 50 plus or minus 10 %, Phase shifting below 5 %) |
| Басқа функциялар: Үзіліс енгізу функциясы | Available (2 points/ch, Max. 8 points/unit)(Note) The interrupt input function can be used for 8 points per unit and for a maximum of 8 units (max. 64 points) in the whole system. However, the entire scan time slows down as more interrupt programs are used. Minimize the use of interrupt programs.(Note) The priority order for interrupt inputs is as follows; In a unit, from the smallest interrupt bit. In the whole system, from the smallest unit number. |
| Кіріс: Мин. ҚОСУ кернеуі / Мин. ҚОСУ тогы: 5 В тұрақты ток | 3.0 V DC / 4 mA |
| Салыстыру функциясы: Мақсатты мәнді сәйкестендіру функциясы | Depending on the count direction, sets or resets the output when the counter value reaches the target value. |
| Кіріс: Мин. ҚОСУ кернеуі / Мин. ҚОСУ тогы: 24 В тұрақты ток | 10 V DC / 4 mA |
| Кіріс: Максималды өшіру кернеуі / Максималды өшіру тогы: 5 В тұрақты ток | 1.0 V DC / 0.5 mA |
| Сыртқы шығыс: Салыстыру нәтижесін шығару функциясы | Outputs the result of comparison function. |
| Кіріс: Максималды өшіру кернеуі / Максималды өшіру тогы: 24 В тұрақты ток | 2.0 V DC / 2 mA |
| Өлшеу функциясы: Жиілікті өлшеу функциясы | Measures the intervals between the variations of count values, and calculates the frequency. |
Техникалық сипаттамалар және өнімділік деректері
Орнату және пайдалану нұсқаулығы